基于有效钻压和扭矩的机械比能理论改进及其在M油田的应用

天津科技 ›› 2025, Vol. 52 ›› Issue (02): 61-65+70.

基于有效钻压和扭矩的机械比能理论改进及其在M油田的应用

方如萱¹, 吴永川², 陈治中², 刘军波²

1.中海油能源发展装备技术有限公司设计研发中心天津 300452;
2.中海油田服务股份有限公司天津 300459

收稿日期:2025-01-09 出版日期:2025-02-25 发布日期:2026-01-06

Improvement of mechanical specific energy theory based on effective WOB and torque and its application in M Oilfield

FANG Ruxuan¹, WU Yongchuan², CHEN Zhizhong², LIU Junbo²

1. CNOOC EnerTech Equipment Technology Co., Ltd. Research & Design Center, Tianjin 300452, China;
2. China Oilfield Services Limited, Tianjin 300459, China

Received:2025-01-09 Online:2025-02-25 Published:2026-01-06

摘要/Abstract

摘要： 自Teale R.首次提出机械比能原始模型以来,已有研究人员研究了诸多改进模型并得到了应用,但大部分模型未明确钻压和扭矩等关键参数的物理意义。以实例进行比较和验证表明,在引入钻头有效钻压和有效扭矩,并提出有效钻压和有效扭矩的计算方法后,模型分析精度得到明显提高。

关键词: 有效钻压和扭矩, 改进机械比能, 有效岩石抗压强度, 钻头选型, 参数优化

Abstract: Since R. Teale first proposed the original mechanical specific energy model,many improved models have been studied and applied. However,most models do not clarify the physical significance of key parameters such as weight on bit （WOB） and torque. This paper introduces the effective WOB and effective torque,and proposes a calculation method for effective WOB and effective torque,which significantly improves the analysis accuracy. An example is used to compare and verify the results.

Key words: effective WOB and torque, improvement of mechanical specific energy, effective rock compressive strength, bit selection, parameter optimization

中图分类号:

TE21

方如萱, 吴永川, 陈治中, 刘军波. 基于有效钻压和扭矩的机械比能理论改进及其在M油田的应用[J]. 天津科技, 2025, 52(02): 61-65+70.

FANG Ruxuan, WU Yongchuan, CHEN Zhizhong, LIU Junbo. Improvement of mechanical specific energy theory based on effective WOB and torque and its application in M Oilfield[J]. TIANJIN SCIENCE & TECHNOLOGY, 2025, 52(02): 61-65+70.

参考文献

[1] TEALE R.The concept of specific energy in rock drilling[J]. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts,1965,2(1):57-73.
[2] RABIA H,FARRELLY M,BARR M V.A new approach to drill bit selection[C]//European Petroleum Conference.London,United Kingdom:SPE,1986.
[3] 陈永明,闫振来. 定向井井底真实钻压的计算方法[J]. 钻采工艺,1996,19(4):1-5.
[4] 孟英峰,杨谋,李皋,等. 基于机械比能理论的钻井效率随钻评价及优化新方法[J]. 中国石油大学学报:自然科学版,2012,36(2):110-114,119.
[5] PESSIER R C,FEAR M J.Quantifying common drilling problems with mechanical specific energy and a bit-specific coefficient of sliding friction[C]//SPE Annual Technical Conference and Exhibition. Washington D.C.,USA:SPE,1992.
[6] 管志川,呼怀刚,王斌,等. 基于机械比能与滑动摩擦系数的PDC钻头破岩效率试验[J]. 中国石油大学学报:自然科学版,2019,43(5):92-100.
[7] 韦忠良,陈庭根. PDC钻头钻进时扭矩影响因素研究[J]. 石油钻探技术,1995,23(1):50-52,58.
[8] FARRELLY M,RABIA H.Bit performance and selection:A novel approach[C]//SPE/IADC Drilling Conference. New Orleans,USA:SPE,1987.
[9] 李昌盛,赵金海,杨传书,等. 钻头工作效率实时评估新方法[J]. 石油钻采工艺,2012,34(6):1-4.
[10] 徐济银,王吉东,蒋杰. 比能在钻头选型中的应用[J]. 钻采工艺,1996,19(6):86-89.
[11] 陈绪跃,樊洪海,高德利,等. 机械比能理论及其在钻井工程中的应用[J]. 钻采工艺,2015,38(1):6-10,1.
[12] 周长所,杨进,幸雪松,等. 基于机械比能理论的渤海深层钻井参数优化[J]. 石油钻采工艺,2021,43(6):693-697.
[13] RAMPERSAD P R,HARELAND G,BOONYAPALUK P.Drilling optimization using drilling data and available technology[C]//SPE Latin America/Caribbean Petroleum Engineering Conference. Buenos Aires,Argentina:SPE,1994.
[14] MOSTOFI M,RASOULI V,MAWULI E.An estimation of rock strength using a drilling performance model:A case study in blacktip field,Australia[J]. Rock Mechanics and Rock Engineering,2011,44(3):305-316.
[15] HARELAND G,HOBEROCK L L.Use of drilling parameters to predict in-Situ stress bounds[C]//SPE/IADC Drilling Conference. Amsterdam,Netherlands:SPE,1993.