天津科技

天津科技 ›› 2025, Vol. 52 ›› Issue (01): 58-61.

• 基础研究 • 上一篇    下一篇

海工平台建造中甲板板铺板工艺流程的优化设计

张则青1, 刘睿锋1, 耿孝敏1, 史荣飞1, 赵亚琦2   

  1. 1.海洋石油工程股份有限公司天津智能制造分公司 天津 300452;
    2.天津大学建筑工程学院 天津 300354
  • 收稿日期:2025-01-02 出版日期:2025-01-25 发布日期:2026-01-06

Optimization design of deck plate laying process in offshore platform construction

ZHANG Zeqing1, LIU Ruifeng1, GENG Xiaomin1, SHI Rongfei1, ZHAO Yaqi2   

  1. 1. Tianjin Intelligent Manufacturing Branch, Offshore Oil Engineering Co., Ltd., Tianjin 300452, China;
    2. School of Civil Engineering, Tianjin University, Tianjin 300354, China
  • Received:2025-01-02 Online:2025-01-25 Published:2026-01-06

摘要： 针对中国海洋工程装备制造业的发展现状及甲板板铺板工艺流程中存在的问题,提出了自动化、数字化、智能化改进升级的解决方案。通过对传统工艺流程的分析,指出其中存在的信息传递不流畅、龙门吊自动化程度低、人工运输甲板板烦琐等问题,在此基础上,提出了优化设计的关键工艺流程,包括图纸解析、识别定位和自动铺板工艺。通过自动化设备的引入和协同配合作业,使整个甲板板铺板工艺流程实现了高效自动化操作。

关键词: 甲板板铺板, 优化设计, 工艺流程

Abstract: In response to the development status of China’s marine engineering equipment manufacturing industry and the existing issues in the deck plate laying process,solutions for automation,digitization,and intelligent upgrading are proposed. Through the analysis of traditional process flow,it is pointed out that there are issues such as inefficient information transmission,low automation level of gantry cranes,and cumbersome manual transportation of deck plates. On this basis,optimization designs for key process flow are presented,including blueprint analysis,identification positioning,and automated deck plate laying process. By introducing and coordinating automated equipment,the entire deck plate laying process achieves efficient automation.

Key words: deck plate, optimization design, process flow

中图分类号: