天津科技 ›› 2025, Vol. 52 ›› Issue (10): 25-28.

• 基础研究 • 上一篇    下一篇

基于灰色关联分析的塑料改性沥青制备工艺优化试验研究

韩昊岳   

  1. 中国石油化工股份有限公司济南分公司 山东济南 250014
  • 收稿日期:2025-09-05 出版日期:2025-10-25 发布日期:2026-01-06

Experimental study on optimization of plastic-modified asphalt preparation process based on grey relational analysis

HAN Haoyue   

  1. Jinan Branch,Sinopec Corporation,Jinan 250014,China
  • Received:2025-09-05 Online:2025-10-25 Published:2026-01-06

摘要: 塑料改性沥青具有较高的环保性和使用价值,但目前该改性材料在制备过程中容易出现离析问题,且材料综合性能不高。通过设定多个制备工艺条件,对制得材料的存储稳定性、老化性能进行评估,并基于灰色关联分析,计算改性时间、改性温度、搅拌速度,以及改性剂添加量对针入度、延度及软化点影响程度的关联,获得改性材料的综合得分,由此筛选出最佳制备工艺条件。试验结果表明,当改性剂与沥青的配比为1∶25、改性温度为150 ℃、改性时间为60 min,且搅拌速度为3 000 r/min时,制备得到材料的综合性能最优,综合得分超过85分。

关键词: 灰色关联, 沥青材料, 改性, 塑料, 工艺条件, 存储稳定性, 老化性能

Abstract: Plastic modified asphalt has high environmental friendliness and application value. However,at present,this modified material is prone to segregation problems during the preparation process,and the comprehensive performance of the material is not high. By setting multiple preparation process conditions,the storage stability and aging property of the prepared materials are evaluated. Based on grey relational analysis,the correlation degrees of modification time,modification temperature,stirring speed,and modifier dosage with respect to the influences on penetration,ductility,and softening point are calculated. The comprehensive scores of the modified materials are obtained,and thereby the optimal preparation process conditions are screened out. The experimental results show that the prepared material achieves the optimal comprehensive performance with a comprehensive score exceeding 85 points when the ratio of modifier to asphalt is 1:25,the modification temperature is 150 °C,the modification time is 60 minutes,and the stirring speed is 3,000 r/min.

Key words: grey correlation, asphalt material, modification, plastics, process condition, storage stability, aging property

中图分类号: